This product is great for an offshore production liner, HPHT well, or natural gas application.
Available Quantity
FT
Condition
Unused
Mill Year
Manufacturer
Sumitomo
Location
Texas, USA
Field Inspection
Completed!
Receiving Inspection
Completed!
Final Inspection
Pending…
Certified Report
During this phase of PipeFacts™, material is received into one of our regional storage and inspection hubs, and we put material through a more detailed inspection. Our teams of inspectors inspects the pipe body for traceability and potential body defects and inspects the threads while a quality team in the office evaluates the as produced specification of the material test reports (MTRs).
What is
Receiving Inspection
?
Nominal OD
9.875
in.
Nominal ID
8.625
in
Nominal Wall Thickness
0.625
in
Drift
8.469
in
Special Drift
8.5
in
Minimum Yield Strength
110
KSI
Minimum Ultimate Tensile Strength
120
KSI
Collapse Pressure
PSI
Internal / Burst Pressure
PSI
Disclaimer: The burst and collapse figures displayed are based on the API dimension tolerance of 87.5% of nominal wall thickness. Note that martensitic, duplex, super duplex, and nickel alloys often have tighter dimensional tolerances, therefore, increased strength ratings. The properties do not factor connection performance ratings. If your application requires more information ratings, please contact our technical services team, and we happily assist you.
13CRS
Martensitic Stainless
Mild
The Super 13 Chrome alloys, including UNS S41426 and HP-2, are quenched and tempered martensitic stainless steels designed for corrosion resistance in sweet (CO2) and mildly sour (H2S) environments with moderate chloride content, effective up to 350°F.
Compared to standard 13 Chrome, Super 13 Chrome alloys offer enhanced mechanical properties and improved resistance to CO2, H2S, chlorides, pH variations, and high temperatures. Their higher strength and better temperature performance make them suitable for deeper wells with high-pressure, high-temperature (HPHT) conditions, where they are used in downhole tubular components, packers, and other subsurface equipment. Additionally, Super 13 Chrome alloys exhibit superior resistance to H2S and chlorides compared to Modified 13 Chrome, making them ideal for mild sour environments.
UNS S41426 is listed in NACE MR0175/ISO 15156 Table A.19, with a recommended limit of 1.5 psi partial pressure of H2S. It is classified by API 5CRA/ISO13680 as Group 1, Category 13-5-2 alloy, approved for sour service in the 95 ksi yield strength condition.
VAM SLIJ-II
VAM
Premium
Semi Flush
