Contact Us
e69d5527-6aad-4883-96bd-60da0ad8666e.jpg
  • e69d5527-6aad-4883-96bd-60da0ad8666e.jpg
  • e50f407d-cb0a-42f0-8022-e67b7edad3e8.jpg
  • 5.5 20 825 110 PE R3.jpg

OCTG 5.5″ 20# 825-110 Plain End R3

Built for harsh downhole conditions, this 5.5″ 20# 825 110 Plain End R3 tubing delivers high strength and reliable corrosion resistance in highly sour (H₂S) environments with moderate chlorides. Manufactured from Alloy 825 (UNS N08825), it’s rated up to 350°F, MR0175/ISO15156 Type 4c compliant, and withstands up to 200 psi H₂S, making it a strong choice for HPHT and AGI applications.

Available Quantity

4,484

FT

Condition

Unused

Mill Year

2020

Manufacturer

CRA Finished Tubes

Location

Texas, USA

Submit Inquiry

What is PipeFacts?

Field Inspection

Completed!

Receiving Inspection

Completed!

Final Inspection

In Progress

Certified Report

Not Started

Receiving Inspection Complete!

During this phase of PipeFacts™, material is received into one of our regional storage and inspection hubs, and we put material through a more detailed inspection. Our teams of inspectors inspects the pipe body for traceability and potential body defects and inspects the threads while a quality team in the office evaluates the as produced specification of the material test reports (MTRs).

What is

Receiving Inspection

?

100%
  • Visual Body Inspection (VBI)
  • Tally
  • Traceability to MTRs
5%
  • Visual Thread Inspection
  • Drift

Size

Nominal OD

5.5

in.

Nominal ID

4.778

in

Nominal Wall Thickness

0.361

in

Drift

4.653

in

Special Drift

—

in

Strength

Minimum Yield Strength

110

KSI

Minimum Ultimate Tensile Strength

120

KSI

Collapse Pressure

11,110

PSI

Internal / Burst Pressure

12,640

PSI

Disclaimer: The burst and collapse figures displayed are based on the API dimension tolerance of 87.5% of nominal wall thickness. Note that martensitic, duplex, super duplex, and nickel alloys often have tighter dimensional tolerances, therefore, increased strength ratings. The properties do not factor connection performance ratings. If your application requires more information ratings, please contact our technical services team, and we happily assist you.

Alloy

825

Family

Nickel Alloy

Corrosion Resistance Level

High

Alloy Description

Alloy 825 (UNS N08825), also known as 2242, is a cold-hardened nickel-based alloy designed for corrosion resistance in highly sour (H2S) environments with moderate chloride levels, offering high strength up to 350°F.

Alloy 825 provides superior resistance to H2S compared to stainless steels, making it suitable for applications such as downhole tubular components, packers, and other subsurface equipment in sour wells under high-pressure, high-temperature (HPHT) conditions, as well as in Acid Gas Injection (AGI) wells. However, it is important to consider all environmental factors, including H2S, CO2, temperature, pH, and chloride concentration, before finalizing material selection.

This alloy is classified as a type 4c alloy in MR0175/ISO15156, with no restrictions for H2S partial pressure below 270°F and resistance to 200 psi H2S at 350°F.

Elemental Composition

C
6
Carbon
0.05%
Si
14
Silicon
0.5%
P
15
Phosphorus
0.03%
S
16
Sulfur
0.03%
Ti
22
Titanium
0.6%‒1.2%
Cr
24
Chromium
19.5%‒23.5%
Mn
25
Manganese
1%
Fe
26
Iron
20.99%‒37.9%
Ni
28
Nickel
38%‒46%
Cu
29
Copper
1.5%‒3%
Mo
42
Molybdenum
2.5%‒3.5%

Name

Plain End

Licensee

Category

Thread Type

Description

Related Items