Contact Us
dji_export_1638633081939_resized.png
  • dji_export_1638633081939_resized.png
  • dji_export_1638633081020_resized.jpg
  • dji_export_1638633081570_resized.jpg
  • dji_export_1638633081856_resized.jpg
  • dji_export_1638633081939_resized.jpg
  • dji_export_1638633082111_resized.jpg
  • dji_export_1638633081886_resized.png
  • dji_export_1638633080809_resized.jpg
  • dji_export_1638633080899_resized.jpg
  • dji_export_1638633080987_resized.jpg

OCTG 10″ 73.9# 15CR-125 Plain End R3

The 10″ 73.9# JFE-UHP-15CR-125 Plain End R3 casing is engineered from Super 15 Chrome, a quenched and tempered martensitic-ferritic stainless steel that delivers high strength and excellent corrosion resistance in sweet (CO₂) environments with moderate chloride levels. With superior mechanical performance up to 400°F, this casing is well-suited for high-pressure, high-temperature (HPHT) wells and deep subsurface applications. It offers a cost-effective alternative to duplex stainless steels in non-sour conditions, and its plain-end design allows for customized connection solutions to meet specific operational needs.

Available Quantity

3,145

FT

Condition

Unused

Mill Year

Manufacturer

JFE

Location

Texas, USA

Submit Inquiry

What is PipeFacts?

Field Inspection

Completed!

Receiving Inspection

Completed!

Final Inspection

In Progress

Certified Report

Not Started

Receiving Inspection Complete!

During this phase of PipeFacts™, material is received into one of our regional storage and inspection hubs, and we put material through a more detailed inspection. Our teams of inspectors inspects the pipe body for traceability and potential body defects and inspects the threads while a quality team in the office evaluates the as produced specification of the material test reports (MTRs).

What is

Receiving Inspection

?

100%
  • Visual Body Inspection (VBI)
  • Tally
  • Traceability to MTRs
5%
  • Visual Thread Inspection
  • Drift

Size

Nominal OD

10

in.

Nominal ID

8.507

in

Nominal Wall Thickness

0.74672

in

Drift

8.351

in

Special Drift

—

in

Strength

Minimum Yield Strength

125

KSI

Minimum Ultimate Tensile Strength

—

KSI

Collapse Pressure

—

PSI

Internal / Burst Pressure

16,334

PSI

Disclaimer: The burst and collapse figures displayed are based on the API dimension tolerance of 87.5% of nominal wall thickness. Note that martensitic, duplex, super duplex, and nickel alloys often have tighter dimensional tolerances, therefore, increased strength ratings. The properties do not factor connection performance ratings. If your application requires more information ratings, please contact our technical services team, and we happily assist you.

Alloy

15CR

Family

Martensitic Stainless

Corrosion Resistance Level

Mild

Alloy Description

15 Chrome, also known as Super 15 Chrome, is a quenched and tempered martensitic-ferritic stainless steel designed for corrosion resistance in sweet (CO2) environments with moderate chloride levels, offering high strength up to 400°F. Compared to standard 13 Chrome, 15 Chrome provides enhanced mechanical properties and superior resistance to the effects of CO2, chlorides, pH variations, and higher temperatures. Its improved strength and temperature tolerance, relative to Super 13 Chrome, make it suitable for deeper wells operating under high-pressure, high-temperature (HPHT) conditions, where it is used in downhole tubular components, packers, and other subsurface equipment.

In certain applications, 15 Chrome may serve as a more cost-effective alternative to duplex stainless steels like 22 Chrome in HPHT environments. However, it is crucial to evaluate all relevant environmental factors, such as H2S, CO2, temperature, pH, and chloride concentration, before finalizing material selection.

Super 15 Chrome, grade 125, is not recommended for use in sour service conditions.

Elemental Composition

C
6
Carbon
0.04%
Si
14
Silicon
0.5%
P
15
Phosphorus
0.02%
S
16
Sulfur
0.005%
Cr
24
Chromium
14%‒16%
Mn
25
Manganese
0.6%
Fe
26
Iron
71.835%‒78.2%
Ni
28
Nickel
6%‒7%
Cu
29
Copper
1.5%
Mo
42
Molybdenum
1.8%‒2.5%

Name

Plain End

Licensee

Category

Thread Type

Description

Related Items