Material is currently in operator inventory. Photos are current and the material is ready to be transported to the US.
Available Quantity
16,920
FT
Condition
Unused
Mill Year
2014
Manufacturer
Nippon
Location
United Arab Emirates
Field Inspection
Completed!
Receiving Inspection
In Progress
Final Inspection
Not Started
Certified Report
Not Started
In this first step of our PipeFacts™ quality assurance process, we send our field services team to inspect material in its stocked location. During the initial evaluation, we ensure that this material is suitable for acquisition and suitable for prime applications. Once the field inspection is complete, we move material to one of our regional storage and inspection hubs for further inspections.
What is
Field Inspection
?
Nominal OD
7
in.
Nominal ID
6.094
in
Nominal Wall Thickness
0.453
in
Drift
5.969
in
Special Drift
6
in
Minimum Yield Strength
110
KSI
Minimum Ultimate Tensile Strength
120
KSI
Collapse Pressure
10,780
PSI
Internal / Burst Pressure
12,460
PSI
Disclaimer: The burst and collapse figures displayed are based on the API dimension tolerance of 87.5% of nominal wall thickness. Note that martensitic, duplex, super duplex, and nickel alloys often have tighter dimensional tolerances, therefore, increased strength ratings. The properties do not factor connection performance ratings. If your application requires more information ratings, please contact our technical services team, and we happily assist you.
2535
Nickel Alloy
High
Alloy 2535 (UNS N08535) is a cold-hardened nickel-based alloy engineered for corrosion resistance in highly sour (H2S) environments with moderate chloride levels, providing high strength up to 350°F.
Compared to stainless steels, 2535 offers enhanced protection against the effects of H2S, making it suitable for use in downhole tubular components, packers, and other subsurface equipment in sour wells under high-pressure, high-temperature (HPHT) conditions, as well as in Acid Gas Injection (AGI) wells. However, it is essential to evaluate all environmental factors, such as H2S, CO2, temperature, pH, and chloride concentration, before selecting the appropriate material.
UNS N08535 is classified under MR0175/ISO15156 as a type 4c alloy, with no restrictions for H2S partial pressure below 270°F, and it can withstand 200 psi H2S at 350°F.
VAM TOP
VAM
Premium
Threaded & Coupled
APPLICATIONS Suitable for any kind of application, even the most critical: Production casing Tubing Liner Tie-Back HP/HT Well design Screens
