Contact Us
20200415_132523.jpg
  • 20200415_132523.jpg
  • IMG_4567.jpg
  • IMG_4514.jpg
  • 20200415_132429.jpg

OCTG 7″ 35# 13CRS-110 VAM TOP HC R3

This 7″ 35# 13CRS-110 VAM TOP HC R3 casing is made from Super 13 Chrome (13CRS), a quenched and tempered martensitic stainless steel designed for high-strength and enhanced corrosion resistance in sweet (CO₂) and mildly sour (H₂S) environments with moderate chlorides, suitable for service up to 350°F. With improved resistance to pitting, stress corrosion cracking, and elevated temperatures over standard 13Cr, it’s ideal for HPHT wells and challenging downhole applications. The VAM TOP HC connection provides a gas-tight, high-compression seal, delivering secure and reliable performance under extreme mechanical loads.

Available Quantity

9,778

FT

Condition

Unused

Mill Year

Manufacturer

Sumitomo

Location

Texas, USA

Submit Inquiry

What is PipeFacts?

Field Inspection

Completed!

Receiving Inspection

Completed!

Final Inspection

In Progress

Certified Report

Not Started

Receiving Inspection Complete!

During this phase of PipeFacts™, material is received into one of our regional storage and inspection hubs, and we put material through a more detailed inspection. Our teams of inspectors inspects the pipe body for traceability and potential body defects and inspects the threads while a quality team in the office evaluates the as produced specification of the material test reports (MTRs).

What is

Receiving Inspection

?

100%
  • Visual Body Inspection (VBI)
  • Tally
  • Traceability to MTRs
5%
  • Visual Thread Inspection
  • Drift

Size

Nominal OD

7

in.

Nominal ID

6.004

in

Nominal Wall Thickness

0.498

in

Drift

5.879

in

Special Drift

—

in

Strength

Minimum Yield Strength

110

KSI

Minimum Ultimate Tensile Strength

120

KSI

Collapse Pressure

13,030

PSI

Internal / Burst Pressure

13,700

PSI

Disclaimer: The burst and collapse figures displayed are based on the API dimension tolerance of 87.5% of nominal wall thickness. Note that martensitic, duplex, super duplex, and nickel alloys often have tighter dimensional tolerances, therefore, increased strength ratings. The properties do not factor connection performance ratings. If your application requires more information ratings, please contact our technical services team, and we happily assist you.

Alloy

13CRS

Family

Martensitic Stainless

Corrosion Resistance Level

Mild

Alloy Description

The Super 13 Chrome alloys, including UNS S41426 and HP-2, are quenched and tempered martensitic stainless steels designed for corrosion resistance in sweet (CO2) and mildly sour (H2S) environments with moderate chloride content, effective up to 350°F.

Compared to standard 13 Chrome, Super 13 Chrome alloys offer enhanced mechanical properties and improved resistance to CO2, H2S, chlorides, pH variations, and high temperatures. Their higher strength and better temperature performance make them suitable for deeper wells with high-pressure, high-temperature (HPHT) conditions, where they are used in downhole tubular components, packers, and other subsurface equipment. Additionally, Super 13 Chrome alloys exhibit superior resistance to H2S and chlorides compared to Modified 13 Chrome, making them ideal for mild sour environments.

UNS S41426 is listed in NACE MR0175/ISO 15156 Table A.19, with a recommended limit of 1.5 psi partial pressure of H2S. It is classified by API 5CRA/ISO13680 as Group 1, Category 13-5-2 alloy, approved for sour service in the 95 ksi yield strength condition.

Elemental Composition

C
6
Carbon
0.03%
Si
14
Silicon
0.5%
P
15
Phosphorus
0.02%
S
16
Sulfur
0.01%
Ti
22
Titanium
0.01%‒0.5%
V
23
Vanadium
0.5%
Cr
24
Chromium
11.5%‒13.5%
Mn
25
Manganese
0.5%
Fe
26
Iron
74.94%‒82.49%
Ni
28
Nickel
4.5%‒6.5%
Mo
42
Molybdenum
1.5%‒3%

Name

VAM TOP HC

Licensee

VAM

Category

Premium

Thread Type

Threaded & Coupled

Description

Related Items